traxxas

tra4931 Suspension arms (upper/ lower) (1 each)

Upper and lower suspension arms (1 each)      

tra4991 Gearbox halves( f&r)/ rubber access plug

Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles This product is made from high quality materials and designed for lasting performance This is for use...

tra4993 Gear shaft, primary (1)

Gear shaft, primary (1)

tra5122x Chassis, T-Maxx®, long wheelbase (extended 30mm) (6061-T6 aluminum, 4.0mm) (blue anodized)

The replacement 4 mm aluminum T-Maxx® extended-wheelbase chassis is formed from durable 6061-T6 aluminum and then anodized in beautiful blue. Besides forming a rigid backbone for the rest of...

tra5123 Bellcrank bushings (plastic) (4x7x2.5mm) (4)

Set of four 4x7x2.5 mm plastic steering bellcrank bushings  

tra5140 Header, aluminum (T-Maxx®) (for rear exhaust engines only) (TRX 2.5, 2.5R, 3.3)

Replacement aluminum exhaust header for T-Maxx® with TRX® 2.5 and 3.3 engines.

tra5147x Nuts, 5mm flanged nylon locking (steel, serrated) (8

Set of eight 5 mm nylon locking nuts feature a serrated flange to keep them snug on the wheel during most intense action.

tra5151 Half shafts, center (front and rear) (external-splined (2)/ internal-splined (2))/ metal u-joints (4)

Set of two front and rear center half shafts (includes internal (2) and external (2)) and metal crosses (4).

tra5153 Drive cups, inner (2) Revo®/E-Revo® (first generation)/T-Maxx®/E-Maxx (steel constant-velocity driveshafts)/screw pin, M4/15 (2)

Drive cups, inner (2) Revo®/E-Revo® (first generation)/T-Maxx®/E-Maxx (steel constant-velocity driveshafts)/screw pin, M4/15 (2)

tra5211r Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX® 2.5, 2.5R, 3.3)

  Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX® 2.5, 2.5R, 3.3) Roller clutch (one-way bearing) includes 6x8x0.5 washer. Fits TRX® 2.5 and 3.3 engines.

tra5231 Wrist pin/ wrist pin clips (2) (TRX® 2.5, 2.5R)

Wrist pin/ wrist pin clips (2) (TRX® 2.5, 2.5R)

tra5251 Needle, low-speed/ 2x1mm O-ring (2) (TRX® 2.5, 2.5R, 3.3)

Needle, low-speed/ 2x1mm O-ring (2) (TRX® 2.5, 2.5R, 3.3) Low speed needle with 2x1 mm O-rings (2). Fits TRX® 2.5, 2.5R, and 3.3 engines