Product Description
ESC Overview:
The Ghost RC Cobra 8 Ace No Prep Drag Brushless ESC is a cutting-edge electronic speed controller meticulously crafted for the high-intensity demands of 1/10 No Prep Drag racing. This ESC stands out due to its exceptional programmability, allowing racers to fine-tune performance parameters via their transmitter, PC, or the Castle Link V4 USB adapter. This level of customization ensures that users can optimize their setup for any track condition or racing strategy, giving them a competitive edge. Additionally, its capability to operate on 2S-4S LiPo batteries (7.4-14.8V) offers flexibility in power management, allowing for a broad range of power outputs to suit different racing needs. The integrated 8A Peak Adjustable BEC (Battery Eliminator Circuit) is another highlight, providing robust power to your receiver and servos, ensuring consistent and reliable performance even under the most demanding conditions.
Durability and ease of use further elevate the Cobra 8 Ace as an outstanding choice for No Prep Drag racing enthusiasts. Its water and element-proof design ensures it can withstand the harshest racing environments, making it a reliable companion in any weather. The auxiliary wire functionality enables "on-the-fly" adjustments via your transmitter, allowing racers to make crucial changes without the need to stop and reprogram the ESC. Audible alerts provide instant feedback for common issues like motor-over-temperature and low-voltage cutoff, ensuring that any potential problems are immediately brought to the user's attention, thus preventing damage and prolonging the life of your components. With features like 6.5mm female motor connectors ensuring a secure and efficient power transfer, the Ghost RC Cobra 8 Ace No Prep Drag Brushless ESC is designed to deliver peak performance and reliability, making it an indispensable asset for serious drag racing competitors.
Motor Overview:
The Ghost RC V2 1408 4-Pole No Prep Drag Sensored Brushless Motor (7000kV) (Adjustable End-bell) represents the pinnacle of engineering excellence in the world of 1/10 No Prep Drag racing. Specially designed for this high-octane racing category, this motor combines raw power with precision engineering to deliver an unparalleled racing experience. Its powerful 4-pole design ensures maximum torque and efficiency, providing an explosive launch off the line. This motor's core strength lies in its high-quality construction featuring a stainless-steel rotor sleeve and high-performance bearings, which together enable higher gearing and support a jaw-dropping 90,000 RPM limit. These features ensure that the motor not only reaches incredible speeds but also maintains consistent performance under extreme conditions, making it a formidable choice for serious racers aiming for the podium.
Moreover, the V2 Ghost RC 1408 motor is equipped with an adjustable end-bell, allowing you to maximize the potential of your 7000kv motor by fine tuning the motor timing. Racing-grade neodymium magnets and an ultra-durable stainless steel shaft ensure that it can withstand the rigors of competitive racing while delivering peak performance. The 8AWG silicone wires enhance electrical conductivity, ensuring that every bit of power from your battery is efficiently transferred to the motor. This meticulous attention to detail and quality allows the motor to deliver all the power needed to rocket out of the sticky prep at the start and maintain a commanding lead across the finish line. Built-in collaboration with Castle Creations, the 1408-7000kV motor leverages thousands of hours of development experience from the groundbreaking 1412-6400kV motor, pushing the boundaries of what is possible in 2S no prep drag racing. This makes the Ghost RC 1408 not just a motor, but a game-changer, ready to redefine your racing experience and dominate the competition.
NOTE:
- Installation of a capacitor pack is required for drag racing applications
- Please note that while the Cobra 8 ACE is capable of handling incredible amounts of power, your motor must also be up for the task!
- Always run your motor within the manufacturer’s specs
- Use of QS8 or 8mm bullets high current battery connector is required!
- Applying voltages higher than 14.8 V will cause irreparable damage to your controller, voiding the warranty
- Always run your motor within the manufacturer’s specs
- Not intended for operation while submerged in liquid
- Sensor wire must be used to utilize the motors capabilities
Features:
- ESC:
- Specially designed for 1/10 No Prep Drag racing
- Programmable via your transmitter, PC and Castle Link V4 USB adapter
- Integrated powerful 8A peak adjustable BEC
- 2S-4S capable
- Adjustable boost and turbo timing
- Water and element proof design
- Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter
- Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff
- Motor:
- Specially designed for 1/10 No Prep Drag racing
- Powerful 4-pole design
- Adjustable end-bell allows for fine-tuning the motor timing
- Optimized for speed with a stainless-steel rotor sleeve and high-performance bearings
- Enable higher gearing and a head-spinning 90,000 RPM limit
- Water and element proof design
- racing-grade neodymium magnets, stainless steel shaft and 8AWG silicone wires
- Delivers all the power you need to launch out of the sticky prep at the start
Specifications:
- ESC:
- Application: 1/10 No Prep Drag
- Type: Brushless Sensored
- Input Voltage: 2-4S (7.4-14.8V) LiPo
- BEC Voltage: 5.0V-8.0V (5.5V default)
- BEC Current: 8A Peak
- Connectors: 6.5mm Female Motor Connectors
- Dimensions: 2.37x2.05x1.6in (60.2x52.1x42.5mm)
- Weight: 173g (6.1oz)
- Motor:
- Application: 1/10 No Prep Drag
- Type: Brushless Sensored
- Input Voltage: 2S (7.4V) LiPo
- Connectors: 6.5mm Male Motor Connectors
- Diameter: 1.417in (36mm)
- Length: 2.462in (62.55mm)
- Mounting Holes: 3mm @25.4mm
- Shaft Diameter: 0.196in (5mm)
- Shaft Length: 0.787in (20mm)
- Weight: 295g (10.4oz)
Includes:
- (1) Cobra 8 Ace No Prep Drag Brushless ESC
- (1) V2 1408 4-Pole No Prep Drag Sensored Brushless Motor w/Adjustable Endbell (7000kV)
- (1) USB Connecter
- (1) Sensor Wire
