Tools, Fuels, & Fluids

Quik-Cure™ Epoxy BSI-201: 4.5 oz combined net wt. (128 g

QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to...

Slow-Cure™ Epoxy BSI-205: 4.5 oz combined net wt. (128 g)

SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight...

Grip-It™ Instant Adhesive BSI-222

Grip-it™ has been specifically formulated for applying grips and mats for recreational vehicles. Grip-It™ works great on all makes of grips for motorcycles, jet skis, snowmobiles and bicycles. Grip-It™ has a 10-25 second working time...

Slow-Cure™ Epoxy BSI-213: 13 oz combined net wt. (369 g)

SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight...

Insta-Set™ CA Accelerator BSI-151H

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from...

Mid-Cure™ Epoxy BSI-212: 13 oz combined net wt. (369 g)

MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for...

Insta-Clean™ Sticker remover BSI-100H

Works on all surfaces, including: glass, cardboard, plastic, fiberglass and everything else. INSTA-CLEAN™ is ideal for removing price stickers and their adhesive residue. INSTA-CLEAN™ will also remove scuff marks that regular household...

Plastic-Cure™ Model Glue bsi-105

Plastic-Cure™ is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in many cases is an easier way to apply the CA. As long as brush is put back into the bottle after use,...

Un-Cure™ CA Debonder BSI-161H

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone...

Racers Edge - Aluminum Capped Oil Filled Shocks (2pcs) for Blackzon Slyder

Aluminum Capped Oil Filled Shocks (2pcs) for Blackzon Slyder

680 Pieces Heat Shrink Tubing Set epb9325

680 pieces heat shrink tubings in a box, convenient for hobby and household applications. 80 Pieces  x 1.0 x 38mm Black80 Pieces x 1.5 x 38mm Yellow50 Pieces x 2.0 x 38mm Blue50 Pieces x 2.0 x 38mm Black30 Pieces x 2.5 x 38mm Black30...

Trinity - Max Grip Drag Race Tire and Surface Prep

The Team Trinity Max Grip Drag Race Tire and Surface Prep is a specially formulated drag race specific traction compound that provides maximum traction in even the lowest bite conditions. Product comes in a convent bottle with built in applicator to keep...