traxxas

tra5548

This is the Complete Fuel Tank assembly from Traxxas for use on the Jato. COMMENTS: Tank rebuild kit available: TRAC7549 Tank lid with pull ring: TRAC7547 wm 9/03/05 ir/jxs

tra5553 STUB AXLES, (REAR) (2)

Pair of rear steel stub axles  

tra5559 Mounts, suspension pin (rear anti-squat blocks) (1.5, 2.25, 3.0 & 3.75 degree) (1 each)

Suspension pin mount set includes 1.5°, 2.25°, 3°, and 3.75° rear anti-squat blocks

tra5560 Engine mount/ engine mount spacers (2)/ 3x15 CS with washers (4)/ 4x18 BCS (2)/ flathead engine mount screws 3x10 (2

Engine mount with engine mount spacers (2), 3x15 mm screws with washers (4), 4x18 mm screws (2), and 3x10 mm flathead engine mount screws (2)  

tra5565 Brake pads (2)/ brake disc hub/ 3X15 CS (partially threaded) (2)/2mm pin (1)/ 4mm e-clip (1)

Brake pads (2) with brake disc hub, 3X15 screws (2), 2 mm dowel pin and 4 mm e-clip

tra5568 Linkage set, throttle & brake (Jato®) (includes servo horn, rod guides, brake spring, brake adjustment dial, rods (wires), throttle return spring, hardware)

Linkage set includes servo horn, rod guides, brake spring, brake adjustment dial, rods, throttle return spring, and hardware

tra5579 Gears, differential 38-T (1)/ differential drive gear 20-T/ side cover plate (1)/ gasket (1)/ output gear seals (x-ring) (2)/ 2.5x8mmCCS (4)/ 5x10x.5mmTW (2)

38-tooth outer differential gear with 20-tooth drive gear. Includes side cover plate, gasket, x-ring seals (2), 2.5x8 mm screws (4), and 5x10x.5 mm washers (2).  

tra5580 COVER, DIFFERENTIAL

Replacement differential cover  

tra5590 Primary clutch assembly (2-speed shift hub)

Replacement primary clutch assembly (two-speed shift hub)  

tra5677r Cover, gear/ 3x8mm CS (1) (for single motor installation, use with motor plate #5690X)

Cover, gear/ 3x8mm CS (1) (for single motor installation, use with motor plate #5690X)

tra5692 Two speed conversion kit (E-Revo®) (includes wide and close ratio first gear sets, sub-micro servo, and linkage) (Requires 3 channel transmitter)

The two-speed conversion kit offers another dimension of versatility and performance for the 1st generation 1/10 scale E-Revo® (does not fit E-Revo VXL Brushless). Choose between...

tra5696 Y-harness, servo and LED lights (for Summit with Traxxas® Link radio system

Y-harness for servo and LED lights